ToggleLinc V2 Dimmer 600W

Check us out on facebook for Promotions and Coupons

Check us out on Twitter for Promotions and Coupons

Shopping Cart | Wish List | Gift Registry | Affiliates | Customer Service

The Most Advanced Toggle Dimmer

You can also link your new ToggleLinc Dimmer to other INSTEON-enabled switches or controllers to create a variety of light scenes with just the touch of a button. There is no need to rewire your home; just spend a few seconds setting up scenes for "Home," "Dinner" or "Night Time," and your ToggleLinc will automatically adjust the lights you selected to your pre-defined settings. With the ToggleLinc dimmer's remote control ability, you can have the convenience of adding a bedside controller to turn off your lights after you get into bed. Never come home to a dark house again: Install HouseLinc Desktop Software on your computer to schedule any ToggleLinc dimmer or any INSTEON-enabled device to turn on or off at any specific time or even at sunrise and sunset. A pair of SignaLinc RFs should be installed to ensure INSTEON network reliability. The ToggleLinc dimmer can control up to a 600-watt load. Note: anytime ToggleLinc V2 Dimmers are placed directly adjacent to one another, you must subtract 200 watts of capacity from each dimmer. If three dimmers are adjacent to one another, then 400 watts must be subtracted from the capacity of the center dimmer.

If you need a non-dimmable switch to control fluorescent lights, electronic ballasts, halogen lamps and low-voltage lighting transformers, use either the ToggleLinc V2 Relay White, or ToggleLinc V2 Relay Ivory. A ToggleLinc V2 Dimmer Ivory is also available.

Scene Lighting - Change the Lighting to Match Your Mood

Use this switch like any other dimmer to create the perfect on-level with one light, or save your settings to remember pre-determined lighting and fade rates. Push this toggle switch on once for a softly lit glow in the middle of the night or push it on twice for full lighting at dusk.

True Toggle Action with Beautiful, High-Quality Construction

The ToggleLinc V2 Dimmer offers the natural feel of high-end switches: flip up to turn lights on, flip down to turn lights off. You'll also love the crisp, tactile response with each flip, instead of the mushy feeling of other brands. The ToggleLinc is designed and manufactured to ISO9002 specifications and goes through over 10 quality control tests. You'll thank yourself for choosing this premium quality product.

Compatibility

The ToggleLinc V2 Dimmer is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.

Easy To Install

The ToggleLinc V2 Dimmer is so easy to install and set up and yet so affordable, you'll want to replace all of your switches with ToggleLinc Dimmers. Just remove the old switch, reattach the line, load, and ground wires with the addition of the neutral wire using the included wire nuts, and you're done.

Brightness Levels

Adjust the brightness level of your light locally by pushing and holding the ToggleLinc V2 Dimmer in the on position. Use the brightness levels to create just the right amount of lighting for your mood. From the toggle switch you can preset up to 32 brightness levels, or program in one-percent increments using HouseLinc Desktop Software. The white status LED indicates the current status of the light being controlled. When the ToggleLinc Dimmer is turned off, the white LED illuminates to help with finding the switch in the dark.

Adjustable Ramp Rate

You can adjust the speed at which the controlled light turns on or off, also known as the ramp rate. For example, you may want the light in the stairwell to turn on instantly so you can see where you're walking, or you may want the light in the master bathroom to ramp up in a soft, gentle fashion so you're not blinded in the middle of the night. The ramp rate is adjustable between 0.1 seconds and 9 seconds if programmed locally and can extend up to 9 minutes when using HouseLinc Desktop Software.

Create Multi-Way Circuits

Do you have two or three switches that you wish could all control the same light? The ToggleLinc Dimmer allows you to customize your lighting scenes without rewiring your home. These complicated lighting circuits are made simple using INSTEON technology because you won't need to run traveler wires to create the electrical connections.

First replace all of the switches you want to include in the circuit with ToggleLinc V2 Dimmers. The primary dimmer must be connected to the standard wires: load, line, neutral, and ground. The secondary dimmers only need to be connected to line, neutral, and ground. Since no traveler wires are needed, it is easy to place a dimmer wherever you need it. Finally, cross-link all of the secondary dimmers to the primary dimmer for a flexible, fully functional multi-way circuit.

Non-Erasable Memory

All ToggleLinc V2 Dimmer settings are stored in non-volaltile memory and are not lost during power failures. Additionally, in the event of a power loss, the ToggleLinc Dimmer will return to its last brightness level when power is restored.

Need a Wall Plate?

Be sure to order a wall plate for each ToggleLinc dimmer.

Certifications and Warranty

All ToggleLinc V2 products are safety approved. The factory for SmartLabs Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality-control systems and guidelines. Because of this, Smarthome stands behind the entire ToggleLinc V2 line of products with a full 2-year warranty.