Allows HomeSeer to send and receive Z-Wave commands to and from Z-Wave devices. Works with Intermatic HA09C, Intermatic HA07C and HomePro ZTH100 primary controllers (remotes).  NOT for use with HomeSeer Z-Troller. The remote is used to learn your Z-Wave devices. Once learned, the device information is copied to this device using HomeSeer. This allows HomeSeer to control all of your Z-Wave devices. Devices may not be learned to this interface directly. This interface works as a secondary Z-Wave controller. For more advanced control, consider the Z-Troller, which does not require a remote control and runs as a Primary controller.

Includes a 6' USB extension cable!

Specifications:

• Works as a secondary controller and requires at least one primary remote for setup
• Gets power from the computer's USB port
• Drivers are available from the HomeSeer Updater
• Creates a virtual serial port on your PC and looks like a serial device. Some knowledge of your PC's device manager is required to obtain the proper COM port number
• Green LED indicates if device has power

NOTE: Requires at least one Z-Wave remote control if this is to be used with HomeSeer.