The HA06 In-Wall Dimmer is a Z-wave™ enabled device and is fully compatible with any Home Settings network and any Z-wave™ enabled network. Z-wave™ enabled devices displaying the Zwave™ logo can also be used with Home Settings modules and controllers regardless of the manufacturer, and Home Settings modules and controllers can also be used in other manufacturer’s Z-wave™ enabled networks. Each module in a Home Settings network is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.

The outstanding features of the HomeSettings HA06 In-Wall Dimmer Switch include:
• Feedback that will allow you to see whether your device has received the ON/OFF/DIM signal.
• RF signal reliability – each HomeSettings product has a special feature that virtually guarantees that RF signals are received
• Ease of installation
• Manual override
• Replaces standard indoor wall switches
• Use with décor style wall plate (not included)
• 2-way switching only
• Compatible with other Z-wave™ enabled devices

Z-Wave remote control light switch. Supports On/Off and dimming of incandescent lights. Dimming ramp rate is not programmable. The lights status is returned when polled by HomeSeer. Does not support instant status reporting. Green LED is ON when light is ON. Does not require neutral. Power is obtained through lighting load. Load should be at least 20 watts.