FEATURES:
- Every switch is a dimmer, a relay switch AND a transmitter depending on how you program it.
- Robust, trouble-free installation
- Easy to retrofit...no new wires
- Exceptional reliability and noise immunity
- High signal strength and low frequency means UPB can communicate over very long A/C wire runs over one mile in length
- UPB addressing system uses 250 Unit ID's and 250 Network ID's for a total of 62,500 unique network addresses...plus a secure network password!
- Reliable 2-Way digital communication. The transmitter sends a signal and listens to a response from the receiver. The transmitter will continue to re-transmit the signal up to 4 times until it recieves that response
- Super-fast command-to-action time...less than 1/3 of a second
- Can be used with other PLC systems such as X10 in the same house without interference
- Can be used for stand-alone scene lighting control, or with a central controller
- Supported by HAI Omni, Stargate, CommStar, ELK M1, Premise Home Control, HAL2000 and more
- Each device can be programmed to be part of up to 15 scenes without an intelligent controller
- 200 dimming steps and variable fade rate from instant-on to a fade rate of up to one hour
- The LED lights on the switches can be programmed to show a different color for a different load status, and a locally switched dimmer can be programmed to send a status report to the controller
- Shallow switch depth allows for easier J-box installation
SPECIFICATIONS:
- Power requirements: 120VAC +/- 10%, 60 Hz
- Max Load: 900W incandescent and magnetic low voltage
- Wiring Connections: 6" stranded pigtails, #16 AWG for power/load #20 AWG for multi-way travellers.
- Operating Temp: 30-120 deg F (0-50 deg C)
- Dimensions: 4.2H x 1.7W x 1.6D"
- Depth inside J-box 1.33"
