ELK-IP232 Serial to Ethernet Converter

Check us out on facebook for Promotions and Coupons

Check us out on Twitter for Promotions and Coupons

Shopping Cart | Wish List | Gift Registry | Affiliates | Customer Service

Home

Categories

Departments

Manufacturers

Customer Service

Browse By Category

Browse By Department

Browse By Manufacturer

Help & Info

Need Help or have a question please feel free to call us at (877)-356-2122 or (727)-490-7260

Support support@smarthome-products.com

General Questions info@smarthome-products.com

Discussion Forum - Smarthome Products Forum

Now In: Security → Security & Automation Accessories → ELK-IP232 Serial to Ethernet Converter

ELK-IP232 Serial to Ethernet Converter

image.altText.13

E-mail this product to a friend

SKU:	ELK-IP232
Price: $149.93

- Supports both UDP and TCP protocols

- Allows up to twelve (12) simultaneous TCP-IP network connections

- Up to twelve (12) "Rules" may be programmed to make outgoing connections.

- Outgoing connections may be initiated upon power up or when serial activity is detected. They may remain connected indefinitely or for a set time period.

- Selectable baud rate from 300 to 115200 baud

- Supports software handshaking (XON/XOFF) and hardware handshaking (RTS/CTS)

- Multiple Bridges can be used on the same network

- Can be updated in the field with new firmware using the Configuration Utility

- Integrated 802.3 compliant 10/100 Mbit network interface

- RS232, DB9M 9-pin serial port connection

- Connects to the M1 RS-232 Serial port (Port 0).

- RJ45 8-pin Network Jack

- 2.1mm barrel type power connector (center positive)

- LED Indicators for Power, Link, and Data

- Operating Voltage: 12 Volts D.C. from ELK-P1216 Plug-in Power Supply

- Current Draw: approx. 135 mA

- Dimensions: 3.85. L x 1.7. W x 0.93. D

Elk-IP232 Manual

The ELK-IP232 is an Ethernet to RS-232 Serial Port Bridge. It may be used to connect any standard serial communications device such as a PC, an audio/video distribution system, or an Elk-M1 Control, to an Ethernet network. It allows bi-directional communication between the two. It operates as both a network server and a client, which means it is able to both initiate and accept network connections. Once a network connection is made, the remote networked device or computer is virtually connected to the serial device on the other side of the Bridge. Both the network device and the serial device can send and receive messages to and from each other. Up to twelve network devices may be connected simultaneously. Data sent from any one of them is bridged to the serial port. Data received on the serial side is transmitted to all connected network devices. The bridge can send and receive both UDP and TCP packets.

NOTE: Please Check for the latest Configuration Software, Firemare, and Bootware on Elk Product's WebSite

ELK-IP232 Configuration Utility (2.83 MB)
Version 1.1.0 released 02/13/2008

This utility is required to configure the network settings, serial port baud rate, and handshaking settings of ELK-IP232, as well as to update the bootware and firmware.

Download and save the file above, then run it to install the utility on a new PC or to update an existing installation of the utility.

Updates

Bootware (Version 1.0.6 released 02/13/2008)

Firmware (Version 1.0.12 released 02/13/2008)

These updates represent the latest releases of the IP232’s BOOTWARE and FIRMWARE. Both files should be updated as a pair, however the Bootware MUST be updated first. To review the list of changes/enhancements, download the “Release Notes” below. Version 1.1.0 of the Configuration Utility is required to enable the new features added in this firmware release. Download it above.

To download and save the Bootware and Firmware, right-click both links and choose "Save Target As." Save them in any convenient place on your hard drive. The recommended location is: "C:\Program Files\Elk Products\IP232 Config Utility"

Steps for updating the IP232: 1) Using the Configuration Utility, select the device to update, then click the “Update Firmware” button. 2) Select the folder where the updates files were stored. 3) Click “Bootloader,” select the latest bootware file, and click the “Update” button. 4) Repeat to update the firmware

ELK-IP232 Firmware Release Notes