- The module couples transmitter (programmer and controller) signals generated on the 120V leg where the transmitter draws power onto the other leg in a 120/240V or any phase of a 3-Phase 120/208V residential wiring system. The module also amplifies and repeats command signals to maintain proper signal strength throughout the DHC network.
- System Amplifier recommended for all DHC installations to ensure adequate command signal strength
- NOTE: Panel-Mounted Surge Protective Device recommended for all DHC installations to protect DHC circuitry from damaging high-energy transient voltage surges
Couples transmitter (programmer and controller) signals generated on the 120V leg where the transmitter draws power onto the other leg in a 120/240V system or any phase of a 3-phase 120/280V residential wiring system. Pilot light indicates DHC signal is transmitting. Use Cat. No. HCA02-10E in installations requiring Intellisense™ noise immunity.
The 6201 should be installed at the main panel on its own dedicated 15A breaker in accordance with NEC requirements. The 6201 is designed for use in a 3-phase 120/280V residential system.
NOTE: A System Amplifier must be installed in all panels in every DHC installation to ensure adequate signal strength.
NOTE: The 6201 is not compatible with HCCS7-1TW Scene Lighting Controller
