- Universal Low Voltage Module can automate devices operated at low voltages such as sprinklers, skylights and heating/AC systems
- Backed by a Limited Two-Year Warranty
Almost any device operated at low voltages can now be automated using the 6337. This receiver interfaces between the low voltage device and the 120V AC wiring network. It receives an ON or OFF command from DHC Transmitters and can operate sprinkler systems, designated lighting, skylight closures, heating systems, garage door openers and other lighting and motor loads. Simply connect LV wiring to the screw terminal on the module and plug it into any 120V wall outlet. In addition to switching contacts, the 6337 has a built-in alarm that can be set to sound whenever the switch contacts are closed. The 6337 can be set to operate the relay only, the alarm only, or both the relay and the alarm. The 6337 can also be set for momentary operation so that the relay and/or the alarm will be turned on for approximately two seconds in response to any ON command. Does not respond to ALL LIGHTS ON or DIM/BRIGHT commands.
Rated: 120V 60Hz AC only.
Contacts: 5A 12V DC, 100VA 30V DC Inductive
A Cat. No. 6201 DHC System Amplifier Module must be installed in all panels in every DHC installation to ensure adequate signal strength.
