HAI 600W CFL/LED Dimmer Switches


HAI 600W CFL/LED Dimmer

Control 600W CFL/LED Lighting Loads
The 600 Watt CFL/LED Dimmer Switch features a special dimming curve that is optimized for CFL and LED bulbs, but can also control high efficiency incandescent or halogen bulbs up to 600W. The dimming curve provides smooth dimming throughout the entire range regardless of bulb type.

The CFL/LED Dimmer also features a minimal brightness level to prevent the bulb from flickering and an auto-off feature, ideal for pantries, closets, and other spaces where light is not always needed.

HAI 600W CFL/LED Dimmer Switches

Switch Operation
The 600W CFL/LED Dimmer may be used to control the lighting load as follows:

Rocker Event Top Rocker Bottom Rocker
Single-Tap Brightens the light towards fully on Fades the light to fully off
Double-Tap Snaps the light to fully on Snaps the light to fully off
Hold Starts brightening the light towards fully on Starts dimming the light towards fully off
Release Stops brightening the light Stops dimming the light


Switch LED
The 600W CFL/LED Dimmers come equipped with a multi-color LED indicator that may be set to off, blue, red, or magenta. The default settings are as follows:

  • Switch is off - LED is blue
  • Switch is on - LED is off

You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).


The 600W CFL/LED Dimmers feature a default white paddle, connectors, and instructions.

Switch Color Change Kits, sold in case lots of 12 only, are available in White, Ivory, Almond, Light Almond, Brown, Grey, and Black.

Dimmer Switch Colors



No Wallplate is included when you purchase a 600W CFL/LED Dimmer. With the exception of the 1500W and 2400W models, HAI Lighting Control (HLC) switches accommodate standard Leviton Decora-style Wallplates. Mix and match to easily add a personalized touch to any room.


HAI Dimmer Switch Faceplates



About HAI Lighting Control (HLC)
HLC Products work as stand-alone or with a Home Control System. An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet. To discover more about lighting control with an HAI home control system click here.

All HLC products are UL Listed and use Generation III Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring.

 Generation III Universal Powerline Bus (UPB™)

Configuration Software
When used with an Omni family or Lumina family home control system HLC products automatically configure themselves, and outside software is not required.

HAI offersHAI UPB™ UPStart Configuration software for professionals who desire to make advanced changes to HAI's default setup. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.


Requirements / Recommendations

  • 600W CFL/LED Dimmers require a neutral (white) connection wire.
  • If you are using an HAI home control system with HLC switches, you must install a UPB™ PIM.
  • HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler.
  • To use the HAI Upstart Configuration software you must install a UPB™ PIM and use a UPB™ PIM to computer cable to connect it to a computer.


In three-gang installations these switches must be de-rated to 500W.

Description Load
Device Maximum Load 600W
Next to One Dimmer 600W
Next to Two Dimmers 500W