HAI 2400W Dimmer Switch

 

HAI 2400W Dimmer Switch

Control 2400W Lighting Loads
The HAI UPB™ 2400W Dimmer Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a Non-Dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch.

HAI 2400W Dimmer Switch
 

Switch Operation
The 2400W switch has a Decora-style rocker switch.

The 2400W Dimmer may be used to control the lighting load as follows:

Rocker Event Top Rocker Bottom Rocker
Single-Tap Brightens the light towards fully on Fades the light to fully off
Double-Tap Snaps the light to fully on Snaps the light to fully off
Hold Starts brightening the light towards fully on Starts dimming the light towards fully off
Release Stops brightening the light Stops dimming the light

 

Switch LED
The 2400W switches come equipped with a multi-color LED indicator that may be set to off, blue, red, or magenta. The default settings are as follows:

  • Switch is off - LED is blue
  • Switch is on - LED is off

You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).

 

Colors
The switch paddle is not removable for the 2400W switch; accordingly, you must order your desired color. It is available in White (WH) or Ivory (IV) colors.

HAI 1500W Color Swatches
 

Wallplate
This switch requires a special sized Wallplate and no Wallplate is included when you purchase this switch; You may purchase a White or Ivory Wallplate from HAI.

 

About HAI Lighting Control (HLC)
HLC Products work as stand-alone or with a Home Control System. An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet. To discover more about lighting control with an HAI home control system click here.

All HLC products are UL Listed and use Generation III Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring.

 Generation III Universal Powerline Bus (UPB™)
 

Configuration Software
When used with an Omni family or Lumina family home control system HLC products automatically configure themselves, and outside software is not required.

HAI offers HAI UPB™ UPStart Configuration software for professionals who desire to make advanced changes to HAI's default setup. It will allow you to change the mode of a Dimmer Switch to be Non-Dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.

 

Requirements / Recommendations

  • 2400W Switches require a neutral (white) connection wire.
  • If you are using an HAI home control system with HLC switches, you must install a UPB™ PIM.
  • HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler.
  • To use the HAI Upstart Configuration software you must install a UPB™ PIM and use a UPB™ PIM to computer cable to connect it to a computer.

 

De-rating
For a proper fit in a multiple gang installation, it may be necessary to remove one or both of the break-off tabs on the sides of the 2400W switch. When tabs are removed, the overall rating of the device must be reduced in accordance with the following chart:

Description Load
Device Maximum Load * 2400W
No Fins Removed Large Box ** 2000W
No Fins Removed Normal Depth Box*** 1800W
One Fin Removed Next to One Dimmer 1600W
Both Fins Removed Next to Two Dimmers 1400W

* Requires mounting in lighting control panel, available directly from Powerline Control Systems (PCS)
** Large Wall Box = greater than 90 Cubic Inches, such as RACO # 698
*** When mounted in 45 Cubic Inch wall box, such as RACO # 696

  HAI 2400W Dimmer Manual
Loading...