HAI 15A Relay Switch

 

HAI 15A Relay Switch

15A Relay Switch is Ideal for Heavier Loads
The HAI UPB™ 15A Relay Switch controls non-dimming loads and is ideal for heavier loads or for motors (like ceiling fans) that may hum when used with Dimming or Non-Dimming switches.

HAI 15A Relay Switch
 

Switch Operation
The 15A Relay Non-Dimming switch has a Decora-style rocker switch and may be used to control the lighting load as follows:

The 2400W Dimmer may be used to control the lighting load as follows:

Rocker Event Top Rocker Bottom Rocker
Single-Tap Turns the load fully on Turns the load fully off

 

Switch LED
The 15A Relay switch has a multi-color LED indicator that may be set to off, blue, red, or magenta. The default settings are as follows:

  • Switch is off - LED is blue
  • Switch is on - LED is off

You may change these default colors by using the HAI UPB™ UPStart configuration software (see below).

 

Colors
The 15A Relay switches come with a default white paddle, connectors, and instructions.

Switch Color Change Kits, sold in case lots of 12 only, are available in White, Ivory, Almond, Light Almond, Brown, Grey, and Black.

HAI 15A Relay Switch Color Change Kit Swatches
 

Wallplate
No Wallplate is included when you purchase a 15A Relay switch. With the exception of the 1500W and 2400W models, HAI Lighting Control (HLC) switches accommodate standard Decora-style Wallplates. Mix and match to easily add a personalized touch to any room.

Wallplates
 

About HAI Lighting Control (HLC)
HLC Products work as stand-alone or with a Home Control System. An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet. To discover more about lighting control with an HAI home control system click here.

All HLC products are UL Listed and use Generation III Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring.

 Generation III Universal Powerline Bus (UPB™)
 

Easier to Install
HAI 15A Relay switches have been engineered with less depth than competitor products; consequently, HAI 15A Relay switches are easier to install.

 

HAI switch comparison
 

Configuration Software
When used with an Omni family or Lumina family home control system HLC products automatically configure themselves, and outside software is not required.

HAI offers HAI UPB™ UPStart Configuration software for professionals who desire to make advanced changes to HAI's default setup. It will allow you to change the mode of a Dimmer Switch to be Non-Dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.

 

Requirements / Recommendations

  • 15A Relay Switches require a neutral (white) connection wire.
  • If you are using an HAI home control system with HLC switches, you must install a UPB™ PIM.
  • HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler.
  • To use the HAI Upstart Configuration software you must install a UPB™ PIM and use a UPB™ PIM to computer cable to connect it to a computer.

  HAI 15A Relay Switch Manual
Loading...