HAI Auxiliary Switch

 

HAI Auxiliary Switch

Make Three-Way or Multi-Way Connections
The Auxiliary Switch can be used with any HAI Lighting Control (HLC) Switch to make "three-way" (two switches control one light) and multi-way (more than two switches control one light) using conventional "three-way" wiring techniques.

HLC Products work as stand alone or with a Home Control System.

HAI 15A Relay Switch
 

Switch Operation
The Auxiliary switch has a Decora-style rocker switch that may be used to control the lighting load as follows:

Rocker Event Top Rocker Bottom Rocker
Single-Tap Brightens the light towards fully on Fades the light to fully off
Double-Tap Snaps the light to fully on Snaps the light to fully off
Hold Starts brightening the light towards fully on Starts dimming the light towards fully off
Release Stops brightening the light Stops dimming the light

 

Switch LED
The Auxiliary switch comes equipped with a multi-color LED indicator that may be set to off, blue, red, or magenta, depending on how the switch is wired.

If the switch is wired to use the LED, it will always remain on with the hard-wired color, regardless if switch is on or off.

 

Colors
This switch comes with a default white paddle, connectors, and instructions.

Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.

HAI Auxiliary Switch Color Change Kit Swatches
 

Wallplate
No Wallplate is included when you purchase this switch. With the exception of the 1500W and 2400W models, HAI Lighting Control (HLC) switches accommodate standard Decora-style Wallplates. Mix and match to easily add a personalized touch to any room.

Wallplates
 

About HAI Lighting Control (HLC)
An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet. To discover more about lighting control with an HAI home control system click here.

 

Easier to Install
HAI Auxiliary switches have been engineered with less depth than competitor products; consequently, HAI Auxiliary switches are easier to install.

 

HAI switch comparison
 

Configuration Software
When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI-UPB-Upstart-Configuration-Software for professionals who desire to make advanced changes to HAI's default setup.

 

Requirements / Recommendations

  • The Auxiliary Switch requires a neutral (white) connection wire.
  • If you are using an HAI home control system with HLC switches, you must install a UPB™ PIM.
  • HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler.
  • To use the HAI Upstart Configuration software you must install a UPB™ PIM and use a UPB™ PIM to computer cable to connect it to a computer.

  HAI Auxiliary Switch Manual
Loading...