System Sensor CHR red chime for ceiling or wall installation.

- Color: Red

- Voltage: Regulated 12DC/FWR or regulated 24DC/FWR

- DC Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)

- FWR Max. Operating Current - Strobe: (see Data Sheet for complete current draw information)

- Wiring Gauge: 12 to 18 AWG

- Trouble Current: 8.5mA max. @ 24 VDC

- Humidity Range: 10 to 93% non-condensing

- Dimensions: 5.6"L × 4.7"W × 1.3"D (142 mm L × 119 mm W × 33 mm D)

System Sensor CHR Manual

System Sensor CHR Data Sheet

SpectrAlert Advance selectable-output chimes and chime/ strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action. Security Guard and nurse workstations are ideal locations for chime products.

SpectrAlert Advance chimes and chime/strobes are rich with features guaranteed to cut installation times and maximize profits. The SpectrAlert Advance Series of notification appliances is designed to simplify your installations, with features such as plug-in designs, instant feedback messages to ensure correct installation of individual devices, and seven field-selectable candela settings for chime/ strobes.

More specifically, when installing SpectrAlert Advance products, first attach a universal mounting plate to a four-inch square, four-inch octagon, single-gang, or double-gang junction box. Then, connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate.

Finally, attach the chime or chime/strobe to the mounting plate by inserting the product’s tabs in the mounting plate’s grooves. The device is rotated into position, locking the product’s pins into the mounting plate’s terminals. The device will temporarily hold in place with a catch until it is secured with a captive mounting screw.

SpectrAlert Advance products allow you to choose:
• 12 or 24 volts
• At 24 volts, 15, 15/75, 30, 75, 95, 110, or 115 candela by way of rearmounted slide switch and front view window
• Select chime tones and volume using a simple rotary switch