ELK-M1XEP M1 Ethernet Interface

- Web server with embedded Java applet "M1 Virtual Keypad"

- Secure connection with password protection and HTTPS encryption

- Flash Memory for Firmware Updating

- Event notification via E-Mail (SMTP)  

- Internet Monitoring and Reporting Capability

- URL Updating using Dynamic DNS

- TCP/IP stack supporting the following protocols: -TCP,UDP,DHCP,SSL 3.0/TLS 1.0, HTTP, SMTP

- Federal Information Processing Standards (FIPS) 128 bit encryption

- Integrated 802.3 compliant 10/100 Mbit network interface

- RS232, DB9M 9-pin serial port connection

- Connects to the M1 RS-232 Serial port (Port 0)

- RJ45 8-pin Network Jack

- 2.1mm barrel type power connector (center positive)

- LED Indicators for Power, Link, and Data

ELK-M1XEP Manual

The ELK-M1XEP is an Ethernet Device Server with a RS-232 Serial Port Interface. It may be used to connect a Control in the M1 Family to an Ethernet network using TCP-IP protocol for programming, remote control and monitoring. It features a secure embedded web server, with a user interface built on a Java applet, and email event notification.  A software setup utility is built into ElkRP (version 1.5.0 or later) for configuring the connection setup, network password, etc. The M1XEP is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. Ethernet switch, cable modem, etc.), however it may also be setup with a static IP address.

• Operating Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply **

• Current Draw: approx. 300 mA

• Housing Dimensions: 4.25" x 6.375" x 2.125"

• Circuit Board Dimensions: 2.25" x 3.95"

• ELK-W040A Serial Ribbon Cable included